1200 Engine rebuild and other stuff
Moderator: gk
Re: 1200 Engine rebuild and other stuff
Hi Falco
Thanks and no worries, have not had time to play with this properly yet
My main consern is the other end. This is how to connect meter to ignition and especially to TPS. Where do i find points and whic connection type is functional?
Thanks and no worries, have not had time to play with this properly yet
My main consern is the other end. This is how to connect meter to ignition and especially to TPS. Where do i find points and whic connection type is functional?
- Dateianhänge
-
- Screenshot 2023-08-08 at 8.21.22.png (238.6 KiB) 2432 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
i did it like the version "best".
I opend the main cabel "pipe" from/to the ECU.
15 cm behind and i used normal cable quick fastener...
I opend the main cabel "pipe" from/to the ECU.
15 cm behind and i used normal cable quick fastener...
Moto Morini Shop: www.bessergemacht.de
Spezialteile für unsere 1200 Morinis.
Viele Grüße aus Dresden
Falko
Spezialteile für unsere 1200 Morinis.
Viele Grüße aus Dresden
Falko
Re: 1200 Engine rebuild and other stuff
To which wire did you connect it?
- Dateianhänge
-
- TPS.png (35.77 KiB) 1616 mal betrachtet
Br,
Vesa
Vesa
-
- Morinisti
- Beiträge: 246
- Registriert: Montag 24. Dezember 2012, 17:18
- Wohnort: 75233 Tiefenbronn
Re: 1200 Engine rebuild and other stuff
Hi Vesa,
to pin C on the "potenziometro farfalla". Here you get a voltage between about 0,06 (fully closed) and 4,24 V (fully open).
So long, Benedikt
to pin C on the "potenziometro farfalla". Here you get a voltage between about 0,06 (fully closed) and 4,24 V (fully open).
So long, Benedikt
Die kürzeste Verbindung zwischen zwei Punkten ist eine Gerade, die schönste eine Kurve !
Re: 1200 Engine rebuild and other stuff
Oil temperature is nice to know...
Used this as starting point https://www.aliexpress.com/item/1005006170263037.html
After some lathe work:
Used this as starting point https://www.aliexpress.com/item/1005006170263037.html
After some lathe work:
- Dateianhänge
-
- IMG20240417130324.jpg (174.18 KiB) 936 mal betrachtet
-
- IMG20240417130223.jpg (325.59 KiB) 936 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
More trouble...
Speedometer has some issues... Anyone have a idea what can it be?
https://1drv.ms/v/s!AvmtFtbY1WJ-hOtn2R0 ... A?e=LpKbzX
Part no M30600002400
Speedometer has some issues... Anyone have a idea what can it be?
https://1drv.ms/v/s!AvmtFtbY1WJ-hOtn2R0 ... A?e=LpKbzX
Part no M30600002400
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
Hi Vesa,
This screen appears when the Dashboard was in "operation hours" mode and you switch on the ignition while holding the black selector button. Maybe the button is always pressed by a dislocated rubber cover.
Heinz
This screen appears when the Dashboard was in "operation hours" mode and you switch on the ignition while holding the black selector button. Maybe the button is always pressed by a dislocated rubber cover.
Heinz
MM Scrambler 1200
Honda CB 550 F2
Honda CB 550 F2
Re: 1200 Engine rebuild and other stuff
Hello Heinz
Thanks for tips but i checked that with multimeter and it was ok. Next guess by my friend was dried out electrolytes so i took it to local electrick reparation shop. All three lytes was ok but engineer found one defect 'wire' on circuitboard. He also asked if i have couplig shema for it. I guess no one have it here on forum as well? It would help us a lot in future...
Will try today if ithis fix was the solutio. Just wonder why this 'burnout' have happened and if there is something more broke but not visible.
EDIT: did not help...
Thanks for tips but i checked that with multimeter and it was ok. Next guess by my friend was dried out electrolytes so i took it to local electrick reparation shop. All three lytes was ok but engineer found one defect 'wire' on circuitboard. He also asked if i have couplig shema for it. I guess no one have it here on forum as well? It would help us a lot in future...
Will try today if ithis fix was the solutio. Just wonder why this 'burnout' have happened and if there is something more broke but not visible.
EDIT: did not help...
- Dateianhänge
-
- Mittari.jpg (311.12 KiB) 496 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
Some esthetics between problems...
Repainted that sun burn black part and replaced badly wornout blinkers with new LED ones. Only extra needed was blinker relay for LED lights. Quite nice i think.
Repainted that sun burn black part and replaced badly wornout blinkers with new LED ones. Only extra needed was blinker relay for LED lights. Quite nice i think.
- Dateianhänge
-
- Rele.jpg (304.32 KiB) 302 mal betrachtet
-
- Musta.jpg (513.87 KiB) 302 mal betrachtet
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
Moved
Zuletzt geändert von VesaII am Freitag 10. Mai 2024, 09:39, insgesamt 2-mal geändert.
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
I replaced "factory" turn signals...
Re: 1200 Engine rebuild and other stuff
Looks great! They also do not need same modifications on front as mine (biggers nuts). Where did you find those?
Br,
Vesa
Vesa
Re: 1200 Engine rebuild and other stuff
But how is your dashboard and did you use resistor or LED relay? Is your turn signal warning FLASHING with green light?
Zuletzt geändert von VesaII am Donnerstag 9. Mai 2024, 12:03, insgesamt 1-mal geändert.
Br,
Vesa
Vesa